Pioneer PDP-503HDE - Manual (Page 19)

Watching TV
Channel display
When preset download finishes, your initial auto
installation is completed.
• “Auto Installation completed.” displays. After that, the
screen changes to the auto installation menu.
7. Watching TV
The setup menu disappears and you can watch the
programmes on channel 1.
Plasma Display
■O
v CHANNEL a
-0-9
-P + /-
Simpie button operations for changing
channels
Using P + / - o n the remote control unit
• Press P+ to increase channel number.
• Press P- to decrease channel number.
When viewing the Teietext information
• Press P+ to increase the page number.
• Press
P— to decrease the page number. * •
I NOTE >
• CHANNEL A/V on the Plasma Display operates the
same as P+l-.
Channel display
SAT.1
12
MONO
Using 0 - 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9
EXAMPLE
• To select channel 2, a 1-digit channel, press 2.
• To select channel 12, a 2-digit channel, press-/""to
select 2-digit input. Then press 1, followed by 2.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9. With Teletext,
you do not use . See page 57.
I NOTE >
• The selected channel such as “12” has been displayed.
With Teletext, the page number displays continuously.
• In the standby mode, when you press 0, the power turns
on and the on-screen image comes from the INPUT 1
source. Or, when you press any button from 1 to 9, a TV
image displays.
-16