Input 1 signal menu input signal source, Input signal setting, Input selection – Pioneer PDP-503HDE User Manual
Page 52: Input, Signal source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Useful adjustment settings
-S
---- O® SLEE.P
?,
o o o o l
Ф
¿3
CD
C
»3
CI3
Ф CD ® CD® Ш1ШЯ: ®Л®1 MENU ENTER A/T INPUT 1 signal menu Input Signal source INPUT 2 signal menu INPUT 3 signal menu Input signal setting 1 Press MENU. 2 Press A/T to select “Option”, and then press ENTER. 3 Press A/T to select “Input Select”, and then press ENTER. 4 Press A/T to select an input source you want to set, and then press ENTER. 5 Press A/V to select a signal type, and then press ENTER • If the selected signal type is incorrect, an image does not display or no colour image displays. 6 Press MENU to exit the menu. I NOTE > • Return to the previous menu by pressing and “PC”. • If no (colour) image displays, try to change the signal type. • Check the operation manual of the external equipment for the signal type. Input selection 1 Press -Q on the remote control unit or INPUT on the Plasma Display. • INPUT SOURCE menu displays. 2 Hold down -Q on the remote control unit or INPUT on the Plasma Display to select the input source. • An image from the selected source automatically displays. • You can also select the input source by pressing А/ I NOTE > • When there are no external sources connected to those terminals, “INPUTS” (COMPONENT) or “INPUT4” will display in gray and not be selectable. • Return to the previous menu by pressing oT\. (Ш)-49
For setting the signal type of external equipment.
• The System automatically sets input signals from “INPUT4”
Can use for selecting the input source.