Control cord connection – Pioneer PDP-503HDE User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using external equipment

Control cord connection

When connecting control cords to the Media Receiver form other remote controlled PIONEER components

bearing the ^ logo, remote control operations are performed through the sensor on the System side.

After connecting to a CONTROL IN jack on another component, its sensor will no longer receive signals. To

operate a component remotely, point the remote control unit of the connected component at the remote control
sensor on the System.

NOTE >

• Make sure the power is turned off when making connections.
• Please complete all component connections before making control cord connections.

The control cables (not supplied) are monaural cables

with mini plugs (no resistance).

(ID-45