Pioneer PDP-503HDE - Manual (Page 51)

Useful adjustment settings
MENU
ENTER
AI TKIN
Auto Sync.
Fine Sync.
Audio Out
RETURN
r
iTTTTT
Adjusting the image
[Fixed]
32%
Auto Sync, adjustment (PC mode only)
For automatically adjusting the computer image.
1 Press MENU.
2 Press A/T to select “Option”, and then press
ENTER
3 Press A/V to select “Auto Sync.”, and then press
ENTER.
• Auto Sync, starts and “Adjusting the image.” displays.
I NOTE >
• Return to the previous menu by pressing o^-
• When Auto Sync, is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync, failed.
• Auto Sync, may fail even if “Auto Sync completed
successfully” displays.
• Auto Sync, may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the computer to the Media Receiver
and switch it on before starting Auto Sync.
MENU
H-Pos. [0] -90 M +90
V-Pos. [0] _60 [■ li . 1 +60
Clock [0] -90 1 __.ii... 1 +90
Phase
Reset
RETURN
[0] -20 1 __ i___ 1 +20
Selected Item Description
H-Pos.
Centres the image by moving it to the left or
right.
V-Pos.
Centres the innage by nnoving it to the up or
down.
Clock
Adjusts the clock frequency.
Phase Adjusts the clock phase.
Fine Sync, adjustment (PC mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
2
4
5
Press MENU.
Press A/T to select “Option”, and then press
ENTER
Press A/V to select “Fine Sync.”, and then press
ENTER
Press A/T to select the specific adjustment item.
Press -41^ to adjust the item to your desired
position.
Press MENU to exit the menu.
NOTE >
• When all adjustments set to factory preset values,
(1) Press A/T to select “Reset”, and then press ENTER.
(2) Press A/T to select “Yes”, and then press ENTER.
• Return to the previous menu by pressing
)-48