Pioneer MJ-D508 - Manual (Page 37)

Moving Tracks on a Disc
Although you can use the progrann playback feature to play a disc out of the 'regular' track order, you can also edit the track
order itself so that the disc pernnanently plays in a different order (unless, of course, you edit the track order again). If you
just want to move a track or two to a different position on the disc, it's probably quickest to use this feature; if you want to
seriously change the order of the whole disc, use the Reorder feature described on the next page in Reordering Tracks on a Disc.
2A6
3,7
5
Press EDIT/NO while the disc is stopped.
The edit menu appears in the display.
Turn the jog dial until you see Move.
On the remote control use the and buttons.
Press the jog dial (ENTER) to select it.
On the remote control press enter .
You now have to specify which track you want to move, and where you
want to move it to.
❖ To abort at this point, press ■ (stop) or edit / no .
Use the jog dial or and buttons to select
the track number you want to move.
Track number
to be moved
Track number
after moving
Press ►► to move the cursor to the destination
track number.
Use the jog dial or and »-i buttons to select a
new track number.
For example, if you want track 4 to be the second track on the disc:
❖ if you made a mistake with either track number, you can still change
them. Use the ◄◄ and ►► buttons to move between the two track
numbers.
Press the jog dial (ENTER) to move the track.
On the remote control press enter .
All the tracks are renumbered automatically.