Pioneer MJ-D508 - Manual (Page 23)

Programming the Track Order
Using the random play feature, you can have the recorder surprise you with the track order. Programming the track order
means telling the recorder precisely which tracks, and in what order, you want played.
The sequence you program applies only to the disc in the recorder at the time. As soon as you eject that disc the program
memory is lost. However, all the while the disc is in the recorder the programmed order will be remembered—even if you
turn the recorder off.
- 2 m
3
2 m
2 m
Track number
programmed
ТПДСК i 'i о 'I 'I :: ■"/. p
20 -12 10 Б 2 О D\/ER PGM
Program step
number
Make sure the recorder is stopped, then press
PROGRAM.
Enter the track numbers in the order you want
them played.
You can program a sequence of up to 30 tracks. The message PGM Full
is displayed when you reach the limit.
There are several ways to select the track numbers to play.
[T] Use the number keys on the remote:
For track numbers 1 to 10 use the individual number buttons.
For track numbers over 10, use either the +10 button or the >10
button:
For example, to select track 16, press:
___ MNO
GH) CD
Alternatively, press:
____ IVIIMO
CD 1=^ CD
'=^
CD
For three-digit track numbers, press >10 twice. For example, to select
track 168 press:
/-w-v MlMCp TUV
(ED ^
(EB
■=!> ( j D
^
CED O
® Use the track skip buttons on the remote:
Use the and track skip buttons to step through the track
numbers, which show up in the display. To add a track to the program
press ENTER or PROGRAM.
0 Use the jog dial on the front panel:
Use the jog dial to step through the track numbers, which show up in
the display. Push the jog dial ( enter ) to add a track to the program.
Press ► (play) to start playback.
The recorder starts with the first track you programmed.
You can use the repeat feature to repeat the whole program.
❖ To cancel the programmed order, first stop the disc, then press
Ш (stop) once more. Ejecting a disc also cancels the program.
❖ To delete the last track in the current program, press CLEAR on the
remote control.
❖ To check the program order, press CHECK on the remote while the
disc is stopped. Step through the tracks by repeatedly pressing CHECK.