Optional accessory, To install rotisserie, Installing rôtisserie – Kenmore Kitchen Grill User Manual
Page 20: Module accessories (all models), Liil, Roti/shish
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
module accessories (all models)
Optional Accessory
ROTI/SHISH
NO.
49926
The rotl/shish accessories are to be used with the steak
grill (No. 49924).
5.
The spit handle is removable, if necessary, Leave
the handle in place for easier handling on the spit
and meat
6.
Take apart and clean after each use when parts
are cool
Caution; The end supports can become hot
TahQ \
/
o™ X
fiiiiii
Skewers
Motor
Low Position
Front End Support'
TO INSTALL ROTISSERIE
1. Grasp the rear end support with two hands (See
Step 1), The end support with five holes fits Into
the rear grill frame and the end support with
skewer support positions fits into the front
Fit the tabs on the end supports into the opening
in the grill frame. Slide forward Push top of the
rear end supports back until bottom is level on the
grill frame (See Step 2).
The motor fits on the back of the rear end support
irr the low position the motor is mounted vertically.
In the high position the mounting is horizontal.
The spit rests in a slot in the front end support.
Push the end of the spit firmly into the motor
socket at the rear of the cooktop Both the spit
and motor must be placed in the same position,
either high or low (See Step 4).
liil
20