Adjustment procedure, Mechanical adjustment – Kenmore 385.15358 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SEWING

machíne

DIV. 20

MODEL 384. 15358

BUTTUNHOLE FUNCTION

TO CHECK:

BOTTONHOLES SHOULD BE ABOUT 3MM LONGER THAN THE LENGTH SET BY THE R

FOOT.

IF THIS LENGTH CANNOT BE OBTAINED, THEN CHECK AND ADJUST AS FOLLOWS:

ADJUSTMENT PROCEDURE:

1. OPEN THE FACE COVER (SEE PAGE 4).

2. TURN THE ADJUSTING SCREW IN THE DIRECTION OF (A) IF THE BUTTONHOLE

STITCH LENGTH IS LONGER THAN THE STANDARD,OR IN THE DIRECTION OF (B) IF

THE BUTTONHOLE STITCH LENGTH IS SHORTER THAN THE STANDARD.

3. ATTACH THE FACE COVER.

MECHANICAL ADJUSTMENT

STANDARD