beautypg.com

To check, Adjustment procedure, Mechanical adjustment – Kenmore 385.15358 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

SEWING

machíne

DIV. 20

MODEL 384. 15358

NEEDLE BAR HEIGHT

MACHINE SETTING:

1.

SET SELECTOR: " i c b "

TO CHECK:

1.

OPEN THE SHUTTLE COVER.

2.

REPLACE THE NEEDLE WITH THE TEST PIN #68368 "A".

3.

REMOVE THE SHUTTLE HOOK AND INSERT THE RADIAL TIMING GAUGE #68366 "B"

ONTO THE SHUTTLE DRIVER.

4.

TURN THE HANDWHEEL TOWARD YOU BY HAND UNTIL THE NEEDLE BAR

REACHES ITS LOWEST POSITION.

5.

THE TIP OF THE TEST PIN #68368 "A" SHOULD BE IN BETEEN THE TWO

HORIZONTAL LINES ENGRAVED ON THE RADIAL TIMING GAUGE #68366 "B".

ADJUSTMENT PROCEDURE:

1.

REMOVE FACE COVER (SEE PAGE 7).

2.

LOOSEN THE SCREW (A) OF THE NEEDLE BAR HOLDER.

3.

MOVE THE NEEDLE BAR UP OR DON BY HAND UNTIL THE TIP OF THE TEST PIN

#68368 "A" COMES IN BETWEEN THE TWO HORIZONTAL PARALLEL LINES

ENGRAVE ON THE RADIAL TIMING GAUGE #68366 "B".

4.

TIGHTEN THE SCREW (A) SECURELY.

5.

ATTACH THE FRONT COVER.

MECHANICAL ADJUSTMENT

SCREW (A)

19