Adjustment procedure, Mechanical adjustment – Kenmore 385.15358 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING
machíne
DIV. 20
MODEL 384. 15358
BARTACK FEED OF BUTTONHOLE
TO CHECK:
IF THE MATERIAL IS FED FORWARD OR BACKWARD WHEN SEWING BARTACK ON
BUTTONHOLE, MAKE AN ADJUSTMENT AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. SET THE PATTERN SELECTOR DIAL AT "
U
" AND THE STITCH LENGTH DIAL AT “ 4
2.
REMOVE THE FRONT COVER (SEE PAGE 9).
3.
PLACE A PIECE OF PAPER UNDER THE FOOT AND TURN THE HANDWHEEL.
IF THE PAPER IS FED FORWARD, TURN THE ADJUSTING SCREW IN THE DIRECTION
OF
(C).
IF THE PAPER IS FED BACKWARD, TURN THE ADJUSTING SCREW IN THE
DIRECTION OF (D).
4. ATTACH THE FRONT COVER.
MECHANICAL ADJUSTMENT
23