Adjustment procedure, Mechanical adjustment – Kenmore 385.15358 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING
machíne
DIV. 20
MODEL 384. 15358
DISTORTED PATTERN
TO CHECK:
IF THE STRETCH STITCH PATTERNS ARE DISTORTED WITH SETTING THE STITCH
LENGTH DIAL AT “ ▼
(IN CASE OF BEING A DIFFERENCE BETWEEN FORWARD FEEDING AND BACKWARD
FEEDING DURING STRETCH STITCH PATTERNS), MAKE AN ADJUSTMENT AS
FOLLOWS:
MECHANICAL ADJUSTMENT
cjj,”, AND THE STITCH LENGTH
ADJUSTMENT PROCEDURE:
1.
REMOVE THE CAP.
2.
SET THE PATTERN SELECTOR DIAL AT “ 1
DIAL AT “ ▼ ”.
3.
TURN THE STRETCH STITCH ADJUSTING SCREW IN THE DIRECTION OF (C)
WHEN A> B, OR IN THE DIRECTION OF (D) WHEN A < B.
4.
MOUNT THE CAP.
A 1
A 2
.,,1.....
~r
B
<>
-----L
o
A = B
"'T
A 1
T"
X
A > B
1
Or-
r
3 B
___ L
X
A < B
22