Possible cause, Questions? before you call for service – Kenmore 362.7562 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
QUESTIONS? BEFORE YOU CALL FOR SERVICE ...
PROBLEM
POSSIBLE CAUSE
TOP BURNERS DO NOT
LIGHT OR DO NOT
BURN EVENLY
» Make sure electrical plug is plugged into a live power outlet,. :
• Burner holes on the side or around the top of burner may be clogged. Remove
burner heads and burner caps, and clean them with a sewing needle or bare wire.
Make sure you do not enlarge the burner holes. Check electrode area for burned-on
food or grease. .
^
' ; ■ ■ ■■
• Make sure drip pans are installed correctly.
BURNER FLAMES VERY
LARGE OR YELLOW
If range is connected to LP gas, contact the person who installed your range
or made the conversion,
,
,
SURFACE BURNERS
LIGHT BUT OVEN
DOES NOT
The oven gas shut-off valve may have accidentally been moved during
cleaning or moving, , ,
:
V \: I ^
To check the oven gas shut-off valve, remove the storage drawer and look
for the gas shut-off lever at the back of the range.
CONTROL SIGNALS
AFTER ENTERING
COOKING TIME OR
START TIME
You forgot to enter a bake temperature or cleaning time. Press the BAKE pad
and desired temperature or the SELF CLEAN pad and desired clean time. :
DISPLAY FLASHES
• Power outage occurred. Reset the CLOCK. See the Using the Clock and Timer section.
UNABLE TO GET THE
DISPLAY TO SHOW “SF”
The oven control pads were not pressed properly. The BAKE and BROIL HI/LO pads
must be pressed at the same time and held for 3 seconds.
FAN NOISE
A cooling fan may automatically turn on and off to cool interna! parts. This is normal
47