Kenmore 362.7562 - Manual (Page 23)

USING THE CLOCK AND TIMER
To Set the Clock
The clock must be set to the correct time of day for the
automatic oven timing functions to work properly. The time
of day cannot be changed during a delayed cooking or a
delayed self-cleaning cycle,
1. Press the CLOCK pad twice,
2. Press the A or V pads.
If the A or V pads are not pressed
within one minute after you press the
CLOCK pad, the display reverts to
the original setting,. If this happens,
press the CLOCK pad twice and
reenter the time of day.
3. Press the START pad until the
time of day shows in the display.
This enters the time and starts
the clock.
Make sure the clock is set
to the correct time of day
To check the time of day when the display is showing other
information, simply press the CLOCK pad . The time of day
shows until another pad is pressed.
To Turn Off the Clock Display
If you have several clocks in your kitchen, you may wish to
turn off the time of day dock display on your range,
1. Press the CLOCK pad once to turn off the time of day
display. Although you will not be able to see it, the clock
maintains the correct time of day,
2. Press the CLOCK pad twice to recall the clock display.
To Set the Timer
The timer does not control oven operations. The maximum
setting on the timer is 9 hours and 59 minutes.
1. Press the KITCHEN TIMER
ON/OFF pad
2. Press the A or T pads until the
amount of time you want shows in
the display, The maximum time
that can be entered in minutes is
59. Times more than 59 minutes
should be changed to hours and
minutes.
The timer is a minute
timer only. The
STOP/CLEAR pad does hanin anain
not affect the timer
If you make a mistake, press the
KITCHEN TIMER ON/OFF pad and
3. Press the START pad. The time will start counting down,
although the display does not change until one minute has
passed,
4. When the timer reaches :00. the control will beep 3 times
followed by one beep every 6 seconds until the KITCHEN
TIMER ON/OFF pad is pressed
23