Kenmore 3405594 - Manual (Page 59)

Probiem Possible Cause Solution
Lint in Load Lint screen is ciogged. Clean lint screen. Check for air
movement.
improper sorting. Sort lint givers from lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carried to the lint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see “OPERATION”).
Paper or tissue in pockets. Clean out pockets before drying.
Piiling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load improper use of fabric softener
in washer.
Use fabric softener sheets in dryer. Add
at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
Items
Shrinking
Overdrying. Match dryer settings to fabric type
(see “OPERATION”).
Poor garment quaiity. Check quality of garment before
purchasing.
Manufacturer’s care labei
instructions not foiiowed. Follow fabric care label instructions
carefully.
Loads are Overloading. Dry smaller loads that can tumble freely.
Wrinkled
Overdrying. Match dryer settings to fabric type
(see “OPERATION").
Load left in dryer at the
end of cycle.
Remove load as soon as tumbling
stops.
Odors Household chemicals, paint,
or varnish being drawn into
dryer.
Do not use dryer while these chemical
fumes are in the air.
Gas Leak Turn off gas supply line. Leave your
house, then call your local gas
company.
Unusual
Sounds
Clicking (Gas Dryers) -
gas valve clicking. Normal operation.
Thumping of rollers when
laundry center has set.
Thump will go away after 5 minutes
of drying.
59