Operating your washer, A warning, Starting your washer – Kenmore 3405594 User Manual
Page 34: Stopping/restarting your washer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
To get the maximum cleaning and
fabric care from your washer, piease
read and follow these instructions.
A WARNING
Explosion Hazard
Never place items in the washer
that are dampened with gasoline
or other flammable fluids.
No washer can completely
remove oil.
Do not dry anything that has ever
had any type of oil on it (including
cooking oils).
Failure to follow these instructions
can result in death, explosion,
or fire.
STARTING YOUR WASHER
STEP 1. Add measured detergent
directly into washer basket. Then piace
a load of sorted ciothes in the washer.
STEP 2. Close washer lid.
STEP 3. Set WATER LEVEL Control ®
based on the size of your wash load
(see page 35).
STEP 4. Set WATER TEMP Controi ©
(see page 35).
STEP 5. Push the Cycle Selector
Controi (Timer) Knob®in and turn
to the right to desired cycie and time
(see pages 36-37).
STEP 6. Pull the Cycle Seiector Controi
(Timer) Knob out. The diai wiii rotate
as the cycie progresses. The knob wiii
not rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
Knob in.
• Pull the knob out to restart.
34