Kenmore 3405594 - Manual (Page 41)

CYCLE DESCRIPTION -
AUTOMATIC DRY CYCLES
The automatic drying cycles
(KNIT/DELICATE or PERMANENT
PRESS/NORMAL) save you time by
providing the best drying results
in the shortest time. This can help
you save money on utility bills and
reduce the risk of fabric damage.
Use the automatic drying cycles for most
loads. Drying time varies according to
type of fabric, size of load, and dryness
setting.
KNIT/DELiCATE CYCLE
• Use this cycle for most loads of knitted,
delicate or sheer fabrics. Clothes are
dried at low heat. When the dryness
selected is reached, the dryer goes into
a 5-minute (approx.) cool-down period.
PERMANENT PRESS/
NORMAL CYCLE
• Use this cycle for sturdy clothes or
permanent press items. Clothes are
dried at high heat. When the dryness
selected is reached, the dryer goes
into a 10-minute (approx.) cool-down
period.
Using Automatic Drying Cycles
• Set the Cycle Selector Control (Timer)
to NORMAL DRY (*) which is good for
most fabrics.
• At the end of the cycle, feel the dried
clothes. If they are damp, select MORE
DRY the next time you do a similar load.
If they are overdried, select LESS DRY
the next time you do a similar load.
• Dryness is determined by thermostats
that react to the amount of moisture in
the air exhausted from the dryer. Moist
air indicates clothes are still damp. Dry
air indicates that moisture has been
removed.
• The End-of-Cycle Signal sounds
once the cycle is completed.
CYCLE DESCRIPTION -
TIMED DRY CYCLES
TIMED DRY CYCLE
Use this cycle to get up to 50 minutes
of heated drying time.
• The heating cycle is followed by a
10-minute (approx.) cool-down period.
• The End-of-Cycle Signal sounds
once the cycle is completed.
TOUCH UP CYCLE
Use this cycle to smooth synthetic and
permanent press clothes that are dean
but wrinkled from being crowded in a
closet or suitcase.
• This setting provides about 15 minutes
of heated tumbling followed by a
10-minute (approx.) cool-down period.
• Remove clothes immediately when
tumbling stops.
41