Kenmore 3405594 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• The installation spacing (shown below)

is in inches and is the minimum allowable.

• Additional spacing should be considered

for ease of installation and servicing.

• If closet door is installed, the minimum

air openings in top and bottom are

required. Louvered doors with equivalent

air openings in top and bottom are
acceptable.

MINIMUM INSTALLATION SPACING

' Recessed area and closet installations

require a 6-inch minimum clearance

above the laundry center.

' All installations must be exhausted

outside. Use at least the minimum
dimensions indicated.

FRONT VIEW

(DOOR NOT SHOWN)

* Additional clearances for wall, door and Hoar tnaldinp m ay be required.

* ***

Opening is m iniinum for close! door. Louvered door with equivalent air openings

is acceptable.

*** Additional space Is needed when exiernal exhausi elbow Is used. Can be 0" clearance

when bouse exhausting is lined up directly wilh dryer exhaust.