beautypg.com

More – Kenmore 106.511800 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

4

.

NOTE: The indicator will not easily slide into the notches if

the rear bubble has not been popped.

Close the air filter door, and check that the indicator is

visible through the rectangular hole in the door.

Replacing the Air Filter

The disposable air filter should be replaced every 6 months,

when the status indicator has completely changed from white to

red.

To order a replacement air filter, see “Accessories.”

1.

Remove the old air filter by squeezing in on the side tabs.

2.

Remove the old status indicator.

3.

Install the new air filter and status indicator using the

instructions in the previous sections.

On some models, your refrigerator's accessory packet includes

a Produce Preserver, which should be installed prior to use. On

some models, the Produce Preserver is already installed at the

factory.

The Produce Preserver absorbs ethylene, allowing the ripening

process of many produce items to slow down. As a result, certain

produce items will stay fresh longer.

Installing the Produce Preserver (on some models)

1.

Remove the Produce Preserver pouches from their

packaging.

more

CAUTION

IRRITANT

Read cautions on back.

CUIDADO

IRRITANTE

s precauciones en la parte de atrás.

2.

Lift up on the housing in order to remove it from its mounting

tab along the wall.

3.

Open the housing by pulling up and out on the back of the

top of the housing.

4.

Place both pouches inside the housing, then snap the housing

back together.

5.

Place the housing back on the mounting tab along the wall.

Installing the Status Indicator (on some modeis)

The Produce Preserver comes with a status indicator, which

should be activated and installed at the same time the pouch is

installed.

CAUTION; IRRITANT

MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.

Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.

FIRST AID TREATMENT:

Contains potassium

permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.

The Produce Preserver pouches should be installed in their

housing, which is located along an interior side wall of the

crisper or convertible drawer.

REPLACE'

▼i

1.

Place the indicator face-down on a firm, flat surface.

2. Apply pressure to the bubble on the back of the indicator,

until the bubble pops to activate the indicator.

3.

Slide open the cap on the Produce Preserver housing.

4.

Place the indicator in the top of the housing, facing outward.

5.

Slide the cap closed, and check that the indicator is visible

through the rectangular hole in the cap.

NOTE: The cap will not easily close if the indicator’s rear

bubble has not been popped.

Replacing the Produce Preserver (on some models)

NOTE: For best performance, always use two pouches.

The disposable pouches should be replaced every 6 months,

when the status indicator has completely changed from white to

red.

To order replacements, see “Accessories.”

1.

Remove the old pouches from the Produce Preserver

housing.

2.

Remove the old status indicator.

3.

Install the new pouches and status indicator using the

instructions in the previous sections.

14