Carl Goldberg GPMA0955 EAGLE 2 - Manual (Page 2)

NECESSARY TOOLS AND SUPPLIES.
MISCELLANEOUS RUBBER BANDS,
PLUS A BOX OF #64 RUBBER
BANDS
WAXED PAPER
MODELING KNIFE AND RAZOR
BLADES
SANDPAPER (ASSORTED GRITS,
INCLUDING COARSE (80), MEDIUM
(150) AND FINE (220-320)
SANDING BLOCK
“T” PINS (at least 75)
FLAT BUILDING BOARD(24”x60”)
SOFT ENOUGH TO PUSH PINS INTO
ELECTRIC DRILL AND ASSORTED
DRILL BITS (1/16”, 1/8” & 3/16”)
SCISSORS
SMALL SCREWDRIVER (1/8” x 3/16”
BLADE TIP)
ALLEN WRENCHES (1/16” & 7/64”)
MASKING TAPE
LONG NOSE PLIERS
COVERING IRON AND HEAT GUN
OPTIONAL: CGP ENGINE TEST STAND, PROP BAL-
ANCER, PROP/GLO-PLUG WRENCH, CGP HINGE
SLOTTING KIT.
1
ITEMS NEEDED TO COMPLETE THIS KIT
1 RADIO GUIDANCE SYSTEMS (3 to 4-CHANNEL
REQUIRED)
1 .29 to .45 2-CYCLE OR .40 to .60 4-CYCLE R/C
ENGINE
PROPELLER, FUEL TANK & TUBING TO SUIT
ENGINE
1 2-1/4” CGP SNAP-ON SPINNER
1 2-1/4” WHEEL*
2 2-1/2” WHEELS*
1 2 OZ. BOTTLE CA GLUE
1 CA ACCELERATOR
1 20 MINUTE EPOXY
1 TUB BALSA TINTED CGP FILLER
2 ROLLS IRON ON COVERING
1 1/2” x 8” x 12” CGP FOAM RUBBER
1/16” x 1/4” WING SEATING TAPE
FUEL PROOF PAINT
OPTIONAL: ITEMS FOR BOLT-ON WING OPTION
DESCRIBED LATER IN BOOK, 4” SILICONE TUBING
FOR EXHAUST EXTENSION; ART ACRYLIC PAINT FOR
PILOT FIGURE, 1/4” CGP ULTRASTRIPE FOR DETAIL-
ING, CGP SCUFF GUARD TO PROTECT TAIL FROM
SCRATCHES.
* Use next larger size wheel if flying from tall grass.