Braeburn 1025NC - Manual (Page 8)

8
User Factory Setting
No. Options Default Options Comments
1 1st stage 0.5 0.5, 1.0 Select a 1st stage temperature
differential or 2.0 differential of .5˚, 1˚ or 2˚F (.25˚, 5˚
or 2˚C)
Table of User Options
Detailed Explanation of User Options:
Temperature Differential
The differential setting is the temperature control range that your thermostat
will provide. The smaller the setting, the tighter your range of temperature
control and comfort will be.
6 Operating Your Thermostat
Setting the System Control Mode
The System Control has two modes of operation–OFF and HEAT. The mode can
be selected by moving the SYSTEM switch to the appropriate position.
OFF Heating system is off.
HEAT Your heating system will operate.
Setting the Fan Control Mode
The Fan Control has 2 modes of operation – AUTO
and ON. The mode can be selected by moving the
FAN switch to the appropriate position.
AUTO The fan will run when required by
the system.
ON The fan will run continually.
NOTE: Some system types do not have a fan control mode.