Braeburn 1025NC - Manual (Page 6)

Factory Setting
Switch Default Options Comments
6
F / C F
HE / HG HG
Set Installer Switches 4
F Select for fahrenheit temperature scale
C Select for celsius temperature scale
HG Select for gas heat or hydronic systems
without fan
HE Select for electric heat or hydronic
systems with fan
Attach Thermostat to Sub-Base 5
1. Line up the thermostat body with the sub-base.
2. Carefully push the thermostat body against the sub-base until it snaps
into place.
3. Insert quick reference card into slot on top of thermostat.
NOTE: The reset button should be pressed after making any changes to the
installer switches.
UP UP