Braeburn 6400 User Manual - Manual (Page 7)

7 User Manual
Thermostat TouchPads
TM
NOTE: Thermostat TouchPads are located on the left, right and bottom portions of the display screen. They are
the “touch sensitive” segments used to adjust your thermostat. Depending on equipment installed, all touchpads
may not show.
SYSTEM..... Selects AUTO (Heat/Cool), COOL, OFF HEAT or EMER (Emergency Heat)
FAN............ Selects AUTO, ON, CIRC (Circulation) and PROG (Program) fan modes
PROG......... Selects programming mode or press for 3 seconds to select SpeedSet
®
mode
HOLD......... Enters/exits the HOLD mode (Program bypass)
DAY/TIME.. Sets the current time and day of the week
BACK......... Moves back in setting modes
NEXT.......... Moves forward in setting modes
RETURN..... Returns to normal mode from program or settings modes
OUTDOOR.. Displays the outdoor temperature if a Braeburn
®
outdoor sensor is installed
HUMIDITY.. Displays or adjusts the current humidity level (6400 only)
CONFIG...... Enters the User settings mode
CLEAN....... Enters a brief screen cleaning mode