Braeburn 6400 User Manual User Manual
Page 19
19 User Manual
Programming a 7 Day Commercial Schedule
The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to
use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule.
Setting All 7 Days at Once (SpeedSet
®
)
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
1. Hold the PROG TouchPad
™
for 3 seconds. The display will
switch to SpeedSet programming mode. All 7 days of the
week will appear and the hour will be flashing.
2. Touch SYSTEM to select HEAT or COOL.
3. Press the SpeedBar
®
up or down to adjust the hour for
the OCCUPIED event. Touch
NEXT.
4. Press the SpeedBar up or down to adjust the minute for
the OCCUPIED event. Touch
NEXT.
5. Press the SpeedBar up or down to adjust the temperature for
the OCCUPIED event. Touch
NEXT.
6. Press the SpeedBar up or down to adjust the fan setting for the
OCCUPIED event. Touch
NEXT.
7. Repeat steps 3-6 for your UNOCCUPIED event.
8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
9. Touch RETURN to exit.