Braeburn 6400 User Manual - Manual (Page 33)

33 User Manual
Humidification and Dehumidification (6400 only)
The Braeburn ® model 6400 can be used to control a whole
house humidifier or dehumidifier. Humidification can be
controlled manually from the thermostat or automatically
when a Braeburn outdoor remote sensor is installed and
configured in the Installer Settings (See Installer Manual).
To view the current humidity level at the thermostat, touch the
HUMIDITY TouchPad
™ (Figure 1). If humidification and dehumidification
are not enabled, you will only see the current humidity level.
If humidification is enabled you will see the current humidity
level along with the humidification set point (Figure 2). Press the
SpeedBar
® up or down to adjust the humidification set point.
Figure 1
Figure 2
Figure 1
Figure 2