AvMap GeoPilot II Plus - Manual (Page 32)

32
pressing ENT.
Please note : The Enroute Airways information displayed in the FULL INFO page may present two
options:
1. Outbound = 0 designates the ending leg of the airway
2. Inbound = 0 designates the starting leg of the airway
In the GOTO menu you can find:
1. SeleCT AIrWAY: by selecting this item, you will display the ENTER AIRWAY window. Using the
cursor key, you can edit the Low Airway name.
Note
Once you confirm the selection with the ENTER key, the airway is depicted in black.
2. CleAr AIrWAY: selecting this item and pressing the ENT key, the airway color will revert to the
original one.
Controlled Areas : ON/OFF displays/hides controlled areas on the moving map. The default
setting is On.
restricted Areas : ON/OFF displays/hides restricted areas on the moving map. The default setting
is On.
display Airspaces : ALL/Below/Above enables to choose what airspaces cut basing on the threshold
chosen in Airspace Level
Airspaces level : Sets the Altitude value that conditions the air spaces display if DISPLAY AIRSPACES
is set ABOVE or BELOW. If DISPLAY AIRSPACES is set ALL , AIRSPACE LEVEL is irrelevant.
fIr and UIr : ON/OFF displays/hides FIR and UIR on the moving map. The default setting is
OFF.
morA : ON/OFF displays/hides MORA on the moving map. The default setting is OFF.
3.5.10.3 land Settings
The Land Settings menu controls the level of cartographic detail shown.
roads : ON/OFF. The default setting is On.
road labels : OFF/AMERICAN/EUROPEAN. The default setting is American.
railroads : ON/OFF. The default setting is On.
City names : ON/OFF. The default setting is On.
rivers & lakes : ON/OFF. The default setting is On.
Cultural features : ON/OFF. The default setting is On.
natural features : ON/OFF. The default setting is On.
landmarks : ON/OFF. The default setting is Off.
3.5.10.4 marine Settings
lights : ON/OFF/NO SECTOR. When Lights are On lights are shown on lighthouses and other lights
that rotate, a light sector is displayed to show the range of coverage for the light. In the No Sector
setting the light is shown without sector. The default setting is On.
Chart boundaries : ON/OFF/AUTO. The default setting is On.
bathymetric & Soundings : ON/OFF. The default setting is On.
bathymetric & Snd range : Sets the min/max value for Bathymetrics and Soundings. If the depth
unit is Meter (MT), the range is [0 - 15000], if Feet (FT) is [0 - 49212], if Fathom (FM) is [0 - 8202].
The default setting is [0, 33] FT.
depth Area limit : Sets a reference depth value (in the range [0 - 30000]). The Depth Areas shown
on the screen are filled with three different shades of blue. Selecting the Min and Max values
in the range of Depth Limit, there are three areas: [0, Min] colored with dark blue, [Min, Max]