AvMap GEOSAT 4 TRUCK - Manual (Page 39)

3
are displayed on the map and it is possible to
view the full list of received marks:
1. Press twice the MENU button to open the
Main Menu.
2. Select with the cursor Mark List and
confirm by pressing ENT to access to the
list of Mark folders.
3. Select the Incoming folder and confirm by
pressing ENT o view the list of the Marks
received via radio.
Set an APRS Mark as destination
It is possible to set as destination, both still
marks and Mark in motion thanks to the
special function ‘intercept to target’:
1. Select the desired Mark in the Mark List.
2. Press MENU to access to the Mark List
Menu.
3. Select Set as destination and confirm by
pressing ENT.
The selected mark will be set as destination
even if it is moving: the software will update
constantly its position and follow it.
10.5 Connection to GSM localization
devices
All the functions available with the Radio
link are also available for GSM localisation
devices.
11. Setting preferences
11.1 System setup
On the Geosat you can set a variety of
preferences, allowing you to customize your
Geosat according to your needs.
To access to the system set up press the
MENU button twice, select System setup and
press the ENT button to confirm. The System
setup window has the following folders:
• General
• Map
• POI
• Routing
• Track
• Alarms
• Date & Time
• Units
• Text language
• Voice language
• Simulator
• Interface
• TMC
Move the JOYSTICK to select the desired
folder and press ENT to confirm.
Select the parameter to be modified and
press the ENT button to confirm.