AvMap GEOSAT 4 TRUCK - Manual (Page 16)

1
4.1 Planning a route from A to B
You can plan a route setting both the depar-
ture and the destination. This function can be
useful if you are in position X and you want
to plan a route from A to B, or if want to plan
a route before leaving, without receiving the
GPS signal.
How to set the departure:
1. Insert the desired address as described in
par. 3.2.
2. Once all the fields in the Find menu have
been filled, press the MENU button.
3. The Find menu will now open. From Route
planning select Set as departure and press
4. Planning a route
the ENT button.
How to set the destination:
1. Once the departure has been set, return
to the Find address menu. Insert the
destination address following the same
procedure as for the departure then press
MENU button.
2. The Find menu will now open. From Route
planning, select Set as destination and
calculate and press the ENT button.
4.2 Deleting a route
To delete the last route planned, follow these
After having set a Mark as Home (read par.
7.5) it is possible to set one’s own Home as
destination with a quick command:
1. Press the MENU button. The Navigation
menu will now open.
2. From Navigation from My Position select
Drive me Home and press the ENT button
to confirm.