AvMap GEOSAT 4 TRUCK - Manual (Page 29)

2
prepared for saving the data. The space
already used on the Hard Disc is shown in
the lower part of the display.
2. Press the MENU button. The File menu
will open.
3. Select Save and press the ENT button to
confirm.
4. The Save to disc window will open. The
Name field is outlined with a dotted line,
Press the ENT button to open the virtual
keyboard.
5. Insert the name for the file using the
JOYSTICK to select the letters. After each
letter, press the ENT button. When the
name is completed select ENT on the
virtual keyboard and confirm by pressing
the ENT button.
6. Move the JOYSTICK to select Type, press
the ENT button and select the type of data
to be saved – i.e. Marks or Tracks. Press
the ENT button to confirm.
7. Move the JOYSTICK to select OK and press
the ENT button to confirm.
8. A warning message will be displayed. Press
the ENT button to save the Marks.
It is possible to save up to 1000 Marks.
After a RAM clear or a software update you
can reload previously saved Marks:
1. Press the MENU button twice, select File
manager and press the ENT button to
confirm.
2. Select the saved file that contains the Mark
to be reloaded. Press the MENU button.
The File menu will open.
3. Select Load and press the ENT button. A
warning message will open. To load the
Marks select OK and press the ENT button
to confirm.
How to delete the user data:
To permanently delete a file containing user
data (your Marks/Tracks):
1. Press the MENU button twice, select File
manager and press the ENT button to
confirm.
2. Select the file to be deleted. Press the
MENU button. The File menu will open.
3. Select Delete and press the ENT button.
A warning message will be displayed. To
delete the Marks/Tracks select OK and
press the ENT button to confirm.
It is not possible to overwrite the content of
an existing file. The refresh option is used
to read the content of the Hard Disc again
when the saved marks folder(s) have been
updated.