AvMap Geosat 4 TRAVEL Europe - Manual (Page 49)

4
12.3 Updating the Map
To update the map of Geosat 4 TRAVEL /
Geosat 4 TRAVEL Platinum / Geosat 4 ALL
visit www.avmap.it for the list of available
maps.
To know whether your cartography needs
to be updated or not, you need to know the
version of the cartography preloaded on the
SD card and check whether that is the latest
one available on the AvMap web site.
To check your cartography version:
1. Press twice the MENU button to open the
Main Menu.
2. Select ABOUT and confirm by pressing +.
3. The about page contains all the info
related to software and cartography. The
cartography version is detailed in the
bottom: Map Name and Version (V.x) e.g.
Italy V.3.
The next step is to verify whether there is a
newer version available on www.avmap.it.
Check in the Cartography section or in the
Shop on line.
13.1 Ram Clear
The Ram Clear is a memory reset that can be
carried out in case of fatal error or to reset
the memory in order to restore the default
settings. Attention: this operation will delete
your Marks if they have not been saved with
the File Manager.
1. Connect the power supply of your AvMap
Geosat. The unit has to be turned off at
that time.
2. Power on the navigator with the PAGE
button pressing at the same time the FIND
button. Hold both keys until the ‘System
Test’ window is displayed.
3. Select Ram Clear with the JOYSTICK, then
13. Troubleshooting
press the + button to confirm.
4. You will then see a message “Are you
sure?” press the + key to confirm. ‘Ram
Cleared’ will be displayed.
5. When the Ram is cleared, you can turn off
the unit with the PAGE button.
13.2 Recovery of damaged SD
In case the SD is damaged, it is possible to
format it and restore the data contained in
the recovery DVD Europe / North America
(Geosat 4 TRAVEL Platinum) or in the
recovery DVD (Geosat 4 TRAVEL, Geosat 4
TRAVEL Europe).