Avlink YX-1044 - Manual (Page 25)

25
9.0.5 Other Application
The software utility will show you at least 32 unit host ID and Name. You can click the Console
down list to select which Host that you want to configure output /input values as Figure 7-14.
The entire connected Host name will be showed on the Console List as Figure 7-15. For this
model, the software utility only shows an ID:00 for the Name: YX-1044 presently.
) When the Console List is empty, please pay attention to the location of switch 1 on the rear
panel of Host is correctly. Then, click Scan to research the configured Host. For YX-1044 model,
only have to make the Console down list value to “00”.
Figure 7-14 Figure 7-15