Avlink VRM-1714 - Manual

Multi-Sync
Video Selector
VRM-1712
VRM-1714
U SER M ANUAL
VRM-1712
VRM-1714
Package Contents-
ƒ 1 AVLINK VRM-1712 or VRM-1714 Multi-Sync Video
Selector
ƒ 1 user manual
ƒ 1 power adapter DC 9V/600mA
If anything is missing, please contact your vendor.
Features
ƒ Bandwidth 250MHZ (-3db).
ƒ Support VGA, SVGA, UXGA, QXGA resolutions.
ƒ Support Multi-Sync video type include RGBHV, RGsB,
RGBS.
ƒ Support synchronous Include positive, negative; TTL or
1Vpp level.
ƒ Supports the DDC1, DDC2, DDC2B, DDC2B+,
DDC2AB. (For video out port 1)
Specifications
Function VRM-1712 VRM-1714
VGA Input Connector
2x HD-15
Female
4x HD-15
Female
VGA Output Connector 1x HD-15 Female
On Line 2 4
LEDs
Selected 2 4
Select Switch 2 4
Max. Resolution 2048x1536 60Hz
Power Adapter (Min.) DC 9V 600mA
Housing Metal
Weight 400 g 420 g
Dimensions (LxWxH) 128x75x45 mm
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1 Red video 9 NC
2 Green video 10 Ground
3 Blue video 11 ID0
4 ID2 12 ID1
5 Ground 13 Horizontal sync
6 Analog ground 14 Vertical sync
7 Analog ground 15 ID3
8 Analog ground
-1-
FRONT VIEW
1. Push-button Switches (Manual type)
2. Port LEDs
REAR VIEW
1. Power Jack
2. Video Output
3. Video
Input
Installation
Before the installation, make sure the peripherals of all PCs
are grounded properly and turned off.
1. Connect the VRM-1712 or VRM-1714 HD-15 female
input connector with HD-15 male to male cable from
PCs.
2. Connect the VRM-1712 or VRM-1714 HD-15 female
output connector with HD-15 male to male cable from
monitor.
3. Connect the power adapter each side.
4. The red LEDs will flash on port 1. If not, please go back
to check step 3.
5. Turn on the PCs and monitor.
6. The green on line LED lights while the PC has been well
connected with the corresponding port & is running.
-2-