Avlink YVR-101A - Manual

YPbPr to VGA
With Audio
Selector Box
(YVR-101A)
USER MANUAL
V1.1
YVR-101A
Package Contents -
ƒ 1 AVLINK YVR-101A Selector Box
ƒ 1 user manual
ƒ 1 power adapter DC 9V 600mA
Any thing missed, please contact with your vendor.
Introduction
The YVR-101A is video/audio selector, 1 port HD-15
VGA / 3.5Ø stereo connectors or 1 set YPbPr RCA
connector / 1 set RL audio RCA connectors input signal,
and output to HD-15 VGA / 3.5Ø stereo connector.
Features
ƒ Resolution up to 2048x1536.
ƒ Support 480i, 480p, 576i, 576p, 720p formats.
ƒ Audio output: support multimedia speakers and
headphone.
ƒ 480i / 576i formats with Macrovision are not
supported.
Specification
Function YVR-101A
Video In Connectors
1 Set YPbPr RCA Female
1 HD-15 Female
Video Out Connector 1 HD-15 Female
Audio In Connectors
1 Set RL RCA Female
1 3.5Ø Stereo Jack
Audio Out Connector 1 3.5Ø Stereo Jack
Cable Distance
(Single end)
65m (Max.)
YPbPr Bandwidth -3dB@70MHz
VGA Bandwidth -3dB@400MHz
Power Adapter (Min.) DC 9V 600mA
Housing Metal
Weight 225 g
Dimensions (LxWxH) 130x85x29.5 mm
Note:
Note that although 480i/576i component video is
supported by the YVR-101A, most PC Display Monitors
cannot handle such line rates. Typically, only 480p, 576p,
720p
are within the displayable line rate range of LCD
and CRT monitors. Furthermore the scaler in LCD
monitor tems must include a de-interlacer for it to display
interlaced video such as with 480i/576i.
-1-
FRONT VIEW
1. YPbPr / RL “Input” Port
2. “Input” Port Selection Switches (YPbPr or VGA)
3. Power LED
Rear View
1. Audio In
2. VGA In
3. Audio Out
4. VGA Out
5. Input Power Jack
Installation
1. Turn off the DVD player, Set Top Box or PC and
monitor or projector.
2. Connect the Set YPbPr RCA Connectors extension
cable between the DVD player or Set Top Box and the
“YPbPr In” port of YVR-101A.
3. Connect the VGA male extension cable between the
PC and the “VGA In” port of YVR-101A.
4. Connect the Set RL RCA Connectors extension cable
between the DVD player or Set Top Box and the “RL
In” port of YVR-101A.
5. Connect the 3.5Ø Stereo plug extension cable
between the PC and the “Audio In” port of YVR-101A.
6. VGA Out connect the monitor or projector.
7. Audio Out connect the multimedia speakers or
headphone.
8. Connect the power adapter with the YVR-101A.
9. Turn on the DVD player, Set Top Box or PC and
monitor or projector.
-2-