ALTANA LCM IV - Manual (Page 45)

46
Standard programs
9. Press Control Limit.
10. Highlight On to change the Upper Control Limit and the
Lower Control Limit settings.
11. The measured points symbol changes the display of the
measured points.
5.3.3.3 Send single and multi-wavelengths from the measured data memory
Data is sent from the internal data log as an XML (Extensible
Markup Language) file or as a CSV (Comma Separated Value)
file, to a directory with the name DataLog on a USB mass storage
device or a network drive. The file can then be processed using a
spreadsheet program. The file name has th format:
DL_Instrument Type_Serial Number_Year-Month-Day_Hour_
Minute_Second.csv or DL_Instrument Type_Serial
Number_Year-Month-Day_Hour_
Minute_Second.xml.
To send data to a printer, refer to
section 5.2.6.2, page 34 .
1. Plug the USB memory stick into the USB-A port on the
instrument or connect the instrument to a network drive (see
section 5.2.6.4, page 35 ).
2. In the main menu, press the Recall Data menu option.
3. Select the data category to be transferred, e.g. Data Log.
A list of the selected measurement data is displayed.