ALTANA LCM IV - Manual (Page 14)

15
Installation
Figure 2 Back view
3.4 Power connections
1. Connect the power cable to the benchtop power supply.
2. Plug the benchtop power supply cable into the back of the
instrument ( Figure 2, page 15 ).
3. Insert the power cable plug into a mains socket
(100–240 V~/47–63 Hz).
4. Turn on the power switch next to the screen to activate the
power supply ( Figure 1, page 14 ).
Note: If you do not intend to use the instrument for a long period,
disconnect it from the power supply.
Note: Make sure the socket you are using is easily accessible.
1 Ethernet port 3 USB port type A
2 USB port type B 4 Connection for benchtop power supply
WA R N I N G
Electrical and fire hazards.
Only use the supplied benchtop power supply LZV844.