ALTANA Micro-Gloss Manual - Manual (Page 22)

21
Calibrate
You can set the scales of the measurement values
for gloss and thickness separately.
5.2.5 Scale Gloss
You can use the Scale menu option to switch back
and forth between Gloss Units and Reflectance (see
the Section on Practical measuring suggestions).
Move the mark to the desired entry and press mode.
A check mark identifies the Scale that is selected.
After you switch the Scale, the unit must not be
recalibrated.
5.2.6 Scale Thickness
You can use the Scale menu option to switch back
and forth between µm and mil. Move the mark to the
desired entry and press mode. A check mark
identifies the Scale that is selected.