A&D Weighing AD-4406 - Manual (Page 33)

AD-4406 Weighing Indicator Page 31
8. 8. 8. 8.
Tare
Tare Tare Tare
The function is used to display a net value with the container weight subtracted from
the total weight, if you place an object into a container to weigh it.
Using the serial interface such as RS-232C, you can do this from the external equipment.
Caution When turning the power off, the tare data is cleared. (CF04=0,1)
Weighing Tare
Operation Place the tare on the weighing unit. Press the TARE key to store the tare
weight after the STABLE mark turns on. The display changes to net.
Caution When displaying a negative gross value, tare can not be used (normally).
To enable tare with a negative gross value, select a CF04 parameter.
Clearing Tare
When pressing the TARE key while gross is zero, tare is cleared and gross is
displayed.
When zeroing with the ZERO key, tare is cleared.
8. Tare