Hangar 9 Pulse XT 60 ARF - Manual (Page 34)

34
 Step 2
Route the two longer hook and loop straps through the
slots inside the fuselage.
Hint: Low-tack masking tape can be used to
keep the straps on the outside of the fuselage
to ease the installation of the battery tray.
 Step 3
Secure the ESC to the bottom of the battery tray using
hook and loop tape.
Note: The front edge of the battery tray
is angled to match the thrust angle of the
firewall. Use the photo to orient the battery
tray correctly before attaching the ESC.
 Step 4
Slide the battery tray into the fuselage with the ESC
facing toward the bottom of the fuselage. Secure the
battery tray in the fuselage using two #4 x 3/8-inch
sheet metal screws.
 Step 5
Use a drill and 5/32-inch (4mm) drill bit to enlarge the
mounting holes in the X-mount.
Section 5: Electric Motor and Cowling Installation