Cabletron Systems Device Management Module Dec GigaSwitch - Manual (Page 56)

9031754 E5 DEC-Specific Applications
5-13
DecElanApp
Extended Bridge
Fragmentation
Click the Fragmentation button so that it displays the desired fragmentation
condition. (True or False)
Remove Mgmt Address
The user can choose between Other and True. The initial setting is Other, but
selecting True will remove the management address.
Remove Mgmt Protocol
The user can choose between Other and True. The initial setting is Other, but
selecting True will remove the management protocol.
Disable Spanning Tree
To enable or disable the Spanning Tree function for an individual port:
1. Double-click on the port’s number or status entry.
2. Click on the Status button so that it displays the desired status.
(Enabled or Disabled)
3. Choose Save All Changes from the File menu and close out of the view.
NTP
The Non-Translated Protocol Table allows the user to specify the IPX(Raw) To
Snap condition as True or False. If the IPX(Raw) To Snap feature is enabled,
IPX(Raw) packets will be converted into SNAP packets.
Rate-Limiting
The Rate-Limiting subview allows the user to enable or disable the
Rate-Limiting feature for a particular port and to set the Max Rate-Limit
Frames Per Second.