FRITSCH PULVERISETTE 1, Model I premium line - Manual (Page 23)

Switch on the device only after all work as described in Ä Chapter 4
‘Installation’ on page 18 has been carried out!
During the first hours of operation, some grease may emerge from the
eccentric bearing of the moving crushing jaw (see also Ä Chapter 8
‘Maintenance’ on page 45). After a few hours of operation, the grease
will have been distributed evenly in the anti-friction bearing chamber
and no more grease emerges.
NOTICE!
Only put the jaw crusher into operation with the crushing
plates (17, 21) mounted!
4.7.1 Switching on
Switch main switch (9) to I.
4.7.2 Function check
Once the grinding chamber is closed and the grinding stock container is
inserted, the device can be started by the START button (26). The labora-
tory jaw crusher starts up. Continue with Ä Chapter 5 ‘Working with the
laboratory jaw crusher’ on page 24.
4.7.3 Switching off
Press the STOP button (27) and the machine comes to a stop. Switch
main switch (9) to 0. The laboratory jaw crsuher switches off completely.
Installation
- 23 -