FRITSCH PULVERISETTE 1, Model I premium line - Manual (Page 21)

1. Take the funnel (1) and the hex wrench also provided (g) out of
the packaging.
2. Lift the rubber seal (E) off the funnel opening of the Jaw Crusher.
To do this, remove the 4 countersunk head screws (D) using the
hexagon socket wrench (g).
3. Fit the rubber seal (E) on the funnel neck. Pay attention to the
position of the holes in the funnel (1) and the rubber seal (E). They
must lie on top of each other.
1 Funnel
g Hex wrench (size 4)
Installation
- 21 -