FRITSCH PULVERISETTE 1, Model I premium line - Manual (Page 13)

CAUTION!
Wear hearing protection!
If a noise level of 85 dB(A) is reached or exceeded, ear pro-
tection should be worn to prevent hearing damage.
WARNING!
The maximum accepted concentration (MAC) levels of the
relevant safety guidelines must be observed; if necessary,
ventilation must be provided or the machine must be oper-
ated under an extractor hood.
DANGER!
Explosion hazard!
– When grinding oxidizable substances, e.g. metals or
coal, there is a risk of spontaneous combustion (dust
explosion) if the share of fine particles exceeds a cer-
tain percentage. When grinding these kinds of sub-
stances, special safety measures must be taken and the
work must be supervised from a specialist.
– The high-speed rotor mill is not explosion protected
and is not designed to grind explosive materials.
n Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the PULVERISETTE 1 premium line will
void Fritsch's declaration of conformity to European directives and
void the guarantee.
n Only use the PULVERISETTE 1 premium line when it is in proper
working order, as intended and in a safety- and hazard-conscious
manner adhering to the operating manual. In particular, immediately
rectify any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
Safety information and use
- 13 -