FRITSCH PULVERISETTE 25 - Manual (Page 27)

page 26
PULVERISETTE 25
4.1.7.3 Changing from the Protected Funnel to the Standard Funnel
1. Close the cutting mill.
2. Close the funnel lid (21).
3. Set the main switch (19) on the back of the instrument to 0
(OFF).
4. Unplug the mains plug (20).
5. Use an Allen key to unscrew the four M6x12 cheese head
screws with which the protected funnel (22) is fastened to the
upper housing (2) and lift off the protected funnel (22).
6. Insert the standard funnel (1) and fasten it with the four M6x12
cheese head screws and the washers.
7. Unscrew the 3 screws holding the motor cover (14) in place.