Cub Cadet RT 75 - Manual (Page 47)

Swivel Handle
43
Handle bar
To remove/replace the handle bar:
1. Disconnect the forward and reverse cables from the
handle bar, by following the procedures described in
Chapter 3: Cables.
2. Remove the nut and bolt that secures the throttle
lever to the handle bar, using a pair of 7/16”
wrenches. See Figure 8.1.
3. Unthread the swivel rod knob. See Figure 8.2.
Figure 8.1
throttle lever
Figure 8.2
swivel rod knob
CHAPTER 8: SWIVEL HANDLE