Cub Cadet RT 75 - Manual (Page 27)

Transmission Removal
23
9. Disconnect the front of the drag bar, using a 5/8”
wrench and a 1/2” wrench. See Figure 5.6.
10. Remove the four screws that hold the frame rails to
the transmission, using a 1/2” wrench.
See Figure 5.7.
11. Loosen, but dot remove, the handle mount nuts and
bolts.
12. Remove the two screws that hold the depth bar
bracket to the rear of the transmission, using a 1/2”
wrench. See Figure 5.8.
Figure 5.6
Drag bar
Remove nut
and bolt
Figure 5.7
screws
handle mount nuts and bolts
Figure 5.8
Remove these screws