Series 5000 – Cub Cadet 5000 Series User Manual
Page 17
Series 5000
13
4.24. Place jack stands under the frame, 6” - 12” in
front of the rear cross-member. Do not lift the
tractor onto the jack stands. Raise the jack
stands to meet the frame. Some adjustment can
be made using shims or rear tire pressure.
WARNING: The transmission housings are
mounted to the underside of the frame. If the
frame is raised and the mounting bolts removed,
then the brake assembly will be resting on the
inside of the frame rail.
4.25. Remove the four nylon lock nuts, flat washers
and bolts securing the transmission to the frame
using 3/4” wrench and a 3/4 socket.
Figure 4.24
Figure 4.25
Lock nuts and
flat washers
CAUTION: Slowly roll the wheels and transmis-
sion rearward while guiding the brake rods
through the frame. The transmission is rear-
heavy, do not allow it to rotate backward.
Figure 4.25
Figure 4.25
Brake rods
routed through
frame
- 7284 (89 pages)
- 7284 (52 pages)
- 72-inch (32 pages)
- ST23 (42 pages)
- 18.5HP Z-Force 42 (56 pages)
- TANK M54 (4 pages)
- LT1024 (28 pages)
- LT1024 (28 pages)
- 454 (20 pages)
- LT1050 (40 pages)
- 23Hp Tank 23BB5DBW150 (32 pages)
- 190-670-100 (12 pages)
- 01008371 15HP Z-Force 44 (54 pages)
- CC 500 (2 pages)
- CC4065 (44 pages)
- 190-192-190 (12 pages)
- PR-521 (16 pages)
- I1042 (36 pages)
- I1042 (56 pages)
- 439 (16 pages)
- 1000 Series (1 page)
- Fabricated Deck InDirect Injection Diesel (32 pages)
- 20HP ENFORCER 44 EN (32 pages)
- Z-FORCE 48 (2 pages)
- 7252 (48 pages)
- 7252 (52 pages)
- EX SERIES EX2900 (2 pages)
- THE TANK M48 (4 pages)
- H 1748 (2 pages)
- CC4025 (88 pages)
- LT1022 (28 pages)
- E977C (36 pages)
- RZT 50VT (2 pages)
- RZT 50 (56 pages)
- Series 390 (20 pages)
- 53AB5JEX750 (36 pages)
- 8404 (289 pages)
- 8354 (56 pages)
- EX450 (4 pages)
- 53AJ8CTX750 (32 pages)
- 7232 D (2 pages)
- Ex32002 (182 pages)
- 5254 (52 pages)
- Time Saver (16 pages)
- Zero-Turn Commercial Riding Mower Professional Turf Equipment (36 pages)