Cub Cadet 5000 Series - Manual (Page 12)

Series 5000
8
3.7. Remove the four screws securing the hydo fan
and pump adapter to the hydro pump input shaft.
3.8. Remove the hydraulic feed tube from the top fil-
ter base and hydro pump using two 11/16”
wrenches.
3.9. Mark the neutral position on the shoulder bolt
between the right hand and left hand neutral
arms (scissor brackets).
3.10. Remove the shoulder bolt, thrust washer and
flanged lock nut from the hydro return bracket
arm and scissor bracket using a 9/16” socket
and 1/4” allen wrench.
Figure 3.7
Hydro Fan
Screws
Figure 3.8
Hydro Feed
Tube
Figure 3.9
Mark on
Shoulder
Bolt
Figure 3.10
Hydro Return
Bracket