COP-USA DVRPRO04 - Manual (Page 68)

63
Chapter 12
in particular directions more conveniently.
The main purpose of Group presets is to allow the user to Auto Pan to spe-
cific preset points.
When the presets are complete, follow these instructions to Auto Pan the
PTZ cameras according to the presets in the groups:
1.Create all the presets in the groups.
2.Choose the number of your desired group roup 1, roup 2, roup
3 and roup 4 under the Pan roup umber.
3.Click Set Group .
4.Click Run Sequence , then the PT cameras will begin to Auto
Pan according to the presets in the group.
Figure 12-6: Pan Group
Example:
Setting Group 1 Choose roup 1, and click Set Group button.
Function To operate presets 1 to 4 automatically in the mode of
Run Sequence .
Setting Group 1 and Group 2 Choose roup 1 and roup 2,
and click Set Group button.
Function To operate presets 1 to 8 in the mode of Run Sequence .
Setting Group 1, Group 2, and Group 3 Choose roup 1,
roup 2, and roup 3, then click Set Group button.
Function To operate presets 1 to 12 in the mode of Run Sequence .
Setting Group 2, Group 3, and Group 4 Choose roup 2,
roup 3, and roup 4, then click Set Group button.
Function To operate presets 5 to 16 in the mode of Run Sequence .