COP-USA DVRPRO04 - Manual (Page 27)

22
Figure 4-5: Recording Quality and Motion Detection Area
Setting Motion Detection
Under “Motion Detection” users can select:
i. Sensitivity - To set the sensitivity relative to the detected motion
from 1 to 5 . The higher the value is, the more sensitive the detec-
tion will be. Thus even a very slight stimulation could be responded
to.
ii. Differentia - A factor that distinguishes differences among images
relating to entity, state or class. from 1 to 10
or example, assuming the value to be 1, once the second image is
different from the first one, an alarm would be started.
Up to six different Motion Detection Windows can be created in one camera
view.
• Click “Draw Area” : if you want to draw a motion detec-
tion frame on the camera images, just drag a frame-sized window
over the desired motion detection area. Continue to do this until all
the needed frames have been drawn (up to 6 detection frames).
• Click “Stop” : After you have clicked drawing area, “Draw
Area” will revert to “Stop” . If you don’t want to
display the detection frames, just press this button to hide all the
frames.
• If you would like to cancel current motion detection settings, click
“Clear Area” to erase all the frames one by one.
• When all settings are complete, click “Apply” and then “OK”
(The screen will return to the main screen).
Motion Detection Setting Recording Quality