COP-USA DVRPRO04 - Manual (Page 65)

60
On the left side of the window you will see a live view from your PTZ
camera. This allows you to configure and see a “live” feed so you can
adjust the system to your requirements.
2.Select the PTZ camera to configure.
Figure 12-2: Camera Selection
PTZ TYPES
The DVR System supports many PTZ devices, the user may select the type
of PTZ.
Then the user chooses the speed of each connected PTZ under the Baud
Rate column.Occasionally, the PTZ camera ID number may differ from the
number shown on the screen; should this occur, please set the camera
number to be the same as the PTZ ID to enable the user to control the PTZ
camera.
Note: For specific details of device setup information, please refer to
the PTZ product documentation.
Note: If the PTZ device Baud rate setting does not match the
corresponding Baud rate setting of the DVR, then the device will most
likely not function correctly.
Figure 12-3: PTZ Type
PTZ Device Control
This function allows setup of the PTZ Device speed, direction, and zoom
ratio.
1.To maneuver the PT camera at different speeds click the drop-down
list next to Speed . sers can set the speed range from 0 7.