COP-USA CD66MK-HW - Manual (Page 9)

- 6 -
RESERVED: Blank.
ALARM SETUP: enter the submenu of the Alarm setup.
ALARM NO: to select the alarm number, from 1 to 4.
ACTION: to select the action of the dome camera after the alarm,
the action could be 1-50 preset positions, the 1
st
cruising track, the
1
st
pattern and the 1
st
scanning line. And the dome camera will go
back to the action before the alarm, after the alarm has been
canceled.
ALARM: to ON/OFF the each numbered alarm.
RETURN: return to the previous menu.
2.3 DISPLAY SETUP: enter the submenu of the DISPLAY SETUP.
CAMERA ID: enter the submenu of the camera ID (address).
DISPLAY: to ON/OFF the display of the camera ID on the screen.
POSITION: to select the display position of the camera ID on the
four corners of the screen.
RETURN: return to the previous menu.
ANGLE DISPLAY: enter the submenu of the ANGLE
DISPLAY.
DISPLAY: to ON/OFF the angle display on the screen.
POSITION: to select the display position of the camera angle on the
top or lower of the screen.
RETURN: return to the previous menu.
PRESET LABEL: enter the submenu of the PRESET LABEL
display.
DISPLAY: to ON/OFF the display of the PRESET LABEL on the
screen.
POSITION: to select the display position of the PRESET LABEL
on the top or lower of the screen.
RETURN: return to the previous menu.
DOME LABEL: enter the submenu of the DOME LABEL.
SYSTEM SETUP
1.ALARM NO: 001
2.ACTION: 001
3.ALARM ON
4.RETURN
1.SYSTEM INFORMATION
2.AUTO FLIP OFF
3.PROP PAN SPD OFF
4.RESERVED N/A
5.
6.RETURN
ALARM SETUP
1.
2.
3.
4.
5.RETURN
1.DISPLAY : ON
2.POSITION: TOP-R
3.RETUTN
DISPLAY SETUP
CAMERA ID
1.
2.
3.
4.
5.RETURN
1.DISPLAY : ON
2.POSITION : TOP
3.RETUTN
DISPLAY SETUP
ANGLE DISPLAY
1.
2.
3.
4.
5.RETURN
1.DISPLAY : ON
2.POSITION : TOP
3.RETUTN
DISPLAY SETUP
PRESET LABEL
1.
2.
3.
4.
5.RETURN
1.DISPLAY : ON
2.POSITION: TOP
3.RETUTN
DISPLAY SETUP
DOM LABEL